GamuT M250i


GamuT Power Amplifiers
Just think of how you love the clarity of the small class A amp, the fluid softness of the tubes and the sheer power of the mos-fets. Ever wondered why you can't have it all at the same time? Well don't. The GamuT range of power amplifiers combines all the advantages and adds a power potential that will blow your mind. Take your pick they come in 6 sizes. From 100 to 380 watts per channel. In stereo or monoblock configuration.

The Trouble With Power
The transistor is a great invention for amplification in general. It's effective on power, energy consumption and production cost. So far, so good. The flipside of it is however that transistors do not carry the same sound characteristics even if they are built together on the same day. So a powerful amplifier made with 32 transistors is more likely to sound like a choir than a single and clear voice.

The GamuT Solution
To achieve the purity and clarity that our clients demand, we have come up with a very simple and very effective solution. We only use one transistor per channel, but a very large one indeed. Using a single massive transistor allows us to tune them to sonic perfection and lay out a much simpler signal path. The transistors we use are massively expensive, but we think it's worth it, and you might agree when you hear our amplifiers perform.

Läs mer på


Shipping weight is 35 kg.
Dimensions are 164 mm high, 431 mm wide, and 470 mm deep.
Idle power consumption is 90W.
The slow blow mains fuse limits power consumption at 1,150W long-term.
Output power in 8 Ohms resistive load is 250W.
Speaker loads below 1.5 Ohms are not allowed by the protection circuit
Noise is at least 100 dB below 250W in 8 Ohms. This depends on the gain selected, and it is below the noise from a CD.
Strong external electromagnetic fields can increase the noise level. Use only shielded signal cables.
The balanced XLR input has a 40 kOhm input impedance. The 3-pin XLR socket has Pin 2 as plus, Pin 3 as minus, and Pin 1 as ground. The RCA unbalanced input has a 20 kOhm input impedance.
Sensitivity can be selected internally by your dealer to be 0.775V, 1.55V, 3.1V or 3.9V for full power.
The output for a loudspeaker is single or biwiring, using 4 mm banana plugs, spade lugs or stripped wire.


Stäng detta fönster och återgå till föregående för att beställa!