Clearaudio Balance +


Referensförsteg i fullt balanserad konstruktion. Separata solida Aluminium chassi för varje kanal. Dubbla externa nätdelar. Högsta komponentkvalitet genom hela designen. Dubbla ingångar. Volymkontroll och mute på fronten. Uppgraderingsbar med Accu nätdelar.

For maximum dynamic headroom and RIAA accuracy of less than 0.1dB, the components are fitted directly on the circuit board in custom aluminium blocks to minimise electrical and mechanical influences and reliably keep disturbances out of the amp.

A precision tool for sound engineers which performs equally well as part of a domestic high-end system. The elegantly designed Balance + has a headphone output on the front panel and a matching second chassis to house its external power supply. The addition of the Accu+ battery power supply makes the Balance + a three-chassis phonostage with an even higher performance. Fitted with a high quality volume control the Balance + can also be directly connected to a power amplifier acting as a control preamp. The Balance + phonostage reproduces the entire range of audiophile recordings unaltered.

Läs mer på: 


* AMPLIFICATION @ 1 KHZ: 44 dB (MM mode)
63 dB (MC mode)
* INPUT IMPEDANCE: 47 kOhm / 220 pF / MM mode
510 Ohm / 220 pF / MC mode
* MM / MC INPUT: switchable (on bottom panel)
* RIAA: delay time: 75 µs / 318 µs / 3180 µs
* DISTORTION: 0.001% (IEC A)
74 dB (MC Mode)
* CHANNEL SEPARATION: > 92 dB (@ 1 kHz) / opposed channel hot-wired
* MAX. OUTPUT VOLTAGE: 10.5 V (@ 1 kHz)
* SUBSONIC FILTER: 20 Hz: –3 dB / Oct
* POWER SUPPLY: ± 18 V DC (external power supply)
Balanced (XLR)
* POWER CONSUMPTION: Max. consumption: 6.6 Watt
Consumption in operation: 6.6 Watt
Off mode: 0.0 Watt (turned off at rear panel)
* TOTAL WEIGHT: Approx. 1.8 Kg (Preamplifier)
Approx. 2.5 kg (Power supply)
* DIMENSIONS (W/D/H in mm) Preamp: 182 x 220 x 55
Power Supply: 182 x 185 x 55


Stäng detta fönster och återgå till föregående för att beställa!