Beskrivning
State-of-the-Art Monaural Amplifier
The highest sound quality at all volume levels, flat frequency response into any load, and stable into the most difficult loads. The Statement M1 is a state-of-the-art monaural amplifier delivering 1,000 watts into 8 ohms and 2,000 watts into 4 ohms or less with THD remaining under 0.1% from 20 Hz to 20 kHz. Designed and engineered in our advanced research center in Ottawa, Canada, the M1 is manufactured in our Toronto facility.
More than just a slim, technologically advanced monaural design, the M1 demonstrates that Class D architecture isn’t fundamentally flawed, it simply hasn’t been implemented well in the past, mainly because it required such a heavy commitment to R&D. We’re fortunate to have the in-house resources to create such a groundbreaking product and one listen will reveal the truly extraordinary nature of this amplifier.
Cutting Edge Technology & Design
* Full resolution of all of the sonic subtleties and complexities in the input signal.
* Accurate reproduction of the full dynamic range of the signal.
* Output stage is never allowed to clip.
* No compression as output increases.
* Flat frequency response into any load, without having to resort to digital conversion or equalization to compensate.
* Stable into all loads including open circuit and short circuit.
* A low noise floor.
* Exceptional efficiency with low heat output.
* An amp so mechanically silent it will suit even the quietest listening room.
* A design that allows multiple units to be stacked with no danger of overheating.
* All of the above delivered at a price point that while not inexpensive, delivers virtually limitless dynamic fidelity.
Specifikation:
* Power Output: continuous, 20 Hz to 20 kHz, <0.1% THD+N
8 Ω: 1000 W, 4 Ω: 2000 W, 3 Ω: 2400 W
2 Ω: >2000 W depending on line voltage regulation
* Frequency Response 20 Hz to 20 kHz
Open circuit: +/- 0.1 dB, 8 Ω: +/- 0.1 dB
4 Ω: +/- 0.1 dB, 2 Ω: +/- 0.2 dB
* Power Bandwidth 1000 W at 8 Ω: 5 Hz to 45 kHz
* THD+N at 1 kHz, 8 Ω: 1 W: 0.01 %, 10 W: 0.01 %
100 W: <0.03 %, 1000 W: <0.06 %
* IMD 19 kHz + 20 kHz, CCIF: 0.003%
* S/N Ratio ref. 1000 W, IEC-A: 113 dB
* Voltage Gain: 29 dB
* Input Sensitivity: 100 mV for 1 W output, 3.2 V for 1000 W output (8 Ω)
* Input Impedance: 10 kΩ (RCA), 20 kΩ (XLR)
* Damping Factor: 800 to 1400 depending on frequency
* XLR Configuration: Pin 1: Ground, Pin 2: Positive, Pin 3: Negative
* DIMENSIONS
Height with feet: 5.7 cm
Height without feet: 1 rack unit
Width standard handles: 49 cm
Width rackmount handles: 48.3 cm
Depth: 47.6 cm
* Weight (unpacked): 9 kg
Läs mer på: www.anthemav.com