Dynaudio Evoke 50

Beskrivning

If a pair of Evoke 50s in a room doesn’t say “statement of intent”, we don’t know what does. Use them in stereo. Use them as part of an Evoke multi-channel home cinema system. However you listen to them, the word ‘epic’ won’t be far from your lips.

Evoke 50 is a full three-way floorstander with a 28mm soft-dome tweeter, a 15cm neodymium midrange driver and twin 18cm woofers.

Come in on a high note
Evoke 50 features Dynaudio’s newest tweeter: Cerotar. It’s a brand-new, ground-up design that uses key technologies from the award-winning Esotar Forty anniversary tweeter, the awesome new Contour series and the all-singing, all-dancing tech-fest that is the all-new Confidence. Our engineers are very proud of it. As well they should be.

Big bottom
Down at the bottom are two 18cm Esotec+ woofers. Like the Cerotar tweeter, they use trickle-down technology from the Contour and Confidence families to bring as much of that high-end DNA to Evoke as possible.

Dedicated midrange
Evoke 50 is the only speaker in the family to have a dedicated midrange driver, so the engineers in Dynaudio Labs decided to make it a little bit special. The 15cm unit they chose is derived directly from the high-end Contour range – which means a powerful neodymium magnet, a 0.4mm-thin diaphragm and a glass-fibre voice-coil former with a trademark Dynaudio aluminium voice-coil.

Specifikation:

* Sensitivity: 87dB (2.83V/1m)
* IEC power handling: 260W
* Impedance: 4 Ω (3 Ω minimum @100Hz)
* Frequency response (±3dB): 35Hz–23kHz
* Box principle: Bass reflex rear ported
* Crossover: 3-way
* Crossover frequency: 430/3500Hz
* Crossover topology: 3rd/2nd order
* Woofer: 2 x 18cm MSP cone
* Midrange: 15cm MSP
* Tweeter: 28mm Cerotar with Hexis
* Weight: 26.9kg
* Dimensions (W x H x D): 215x1140x307mm
* Dimensions with feet/grille (W x H x D): 305x1162x373mm

Läs mer på: www.dynaudio.com