42,990kr

Lyra Kleos

MC-Pickup
leasing
1306kr/mån
Info Läs mer om leasing.
Wasa Kredit AB
Leasing Betala från 1 043 kronor i månaden
Totalbelopp 42 990 kr
Uppläggningsavgift 550 kr
Avtalstid Månadsavgift Restvärde
24 mån 1 679 kr 8 598 kr
36 mån 1 306 kr 4 299 kr
48 mån 1 043 kr 4 299 kr
Samtliga belopp är exkl. moms
Leasing via Wasa Kredit
– den smarta finansieringslösningen
Wasa Kredit äger varorna under leasingperioden, ert företag har nyttjanderätt. Månadsavgiften är avdragsgill. I slutet av avtalstiden köper du loss varorna för restvärdet. Leasing erbjuds för köp från 2 400 till 2 000 000 kronor.
Så här gör du:
Varukorg Lägg varorna i varukorgen och gå till kassan.
Avtalstid Välj mellan avtalstiderna 24, 36 eller 48 månader.
Kort Avtalsprocessen är automatiserad och kreditkontroll görs direkt i kassan.
Mobil Slutför beställningen med signering av BankID av bolagets firmatecknare.
Avtal När avtalet godkänts kan varorna levereras.

MC-pickup från Lyra.

- +
Tags:

Beskrivning

The Kleos is the lowest cost Lyra cartridge to feature the full fledged Ogura manufactured boron cantilever and coil system with Lyra original line-contact (3 x 70μm) stylus. This is similar to what is employed on even the most expensive Lyra models.

Nevertheless, the most important element of the new Kleos is it’s sound. We firmly believe that the Kleos is capable of extracting more information from the vinyl grooves than it’s predecessors, and that the reproduction of music is both more dynamic, more detailed, and more natural than the models preceding it. We also are of the opinion that the Kleos will set a new standard for sonic performance at it’s price point.

Today there are only a small handful of master cartridge builders in the world, and Lyra’s Yoshinori Mishima belongs to this elite group of individuals that are capable of crafting the highest level MC transducers on the planet. His assistant Akiko Ishiyama, who has undergone several years of apprenticeship, is also involved in the building process leading to each Kleos. The Kleos is not only hand made, but each cartridge is listened to extensively and “voiced” by the master cartridge builder, like the finest musical instruments.

Lyra offers a unique combination of capable, advanced cartridge design by Jonathan Carr and complete handmade execution by the above mentioned individuals. Investing in a Lyra Kleos through an authorized retailer will offer you an unparallelled analog experience from your stereo microgroove vinyl records.

Specifikation:

* Designer: Jonathan Carr
* Builder: Yoshinori Mishima (final build, testing), Akiko Ishiyama (preliminary build)
* Type: Medium weight, medium compliance, low-impedance moving coil cartridge
* Stylus: Lyra-designed long-footprint variable-radius line-contact nude diamond (3um x 70um), slot-mounted
* Cantilever system: Solid boron rod with short one-point wire suspension, directly mounted into cartridge body
* Coils: 2-layer deep, 6N high-purity copper, square-shaped chemically-purified high-purity iron former, 5.4ohm self-impedance, 9.0uH inductance
* Output voltage: 0.5mV@5cm/sec., zero to peak, 45 degrees (CBS test record, other test records may alter results)
* Frequency range: 10Hz ~ 50kHz
* Channel separation: 35dB or better at 1kHz
* Compliance: Approx. 12×10-6cm/dyne at 100Hz
* Vertical tracking angle: 20 degrees
* Cartridge body: One-piece machining from solid 7075 alloy billet, with reduced-surface higher-pressure headshell contact area, partially non-parallel shaping, phase-interference resonance-controlling mechanism, and body threaded directly for mounting screws
* Cartridge mounting screws: 2.6mm 0.45 pitch JIS standard
* Distance from mounting holes to stylus tip: 9.5mm
* Cartridge weight (without stylus cover): 8.8g
* Recommended tracking force: 1.65 ~ 1.75g (1.72g recommended)
* Recommended load directly into MC phono input: 95.3ohm ~ 816ohm (determine by listening, or follow detailed guidelines in user manual)
* Recommended load via step-up transformer: 5 ~ 15ohm (step-up transformer’s output must be connected to 10kohm ~ 47kohm MM-level RIAA input, preferably via short, low-capacitance cable)
* Recommended tonearms: High-quality pivoted or linear tangential) tonearms with rigid bearing(s), adjustable anti-skating force, preferably VTA

Läs mer på: www.lyraanalog.com

Varumärke

Lyra

‎LYRA är baserat i Tokyo och leds av Stig Bjorge från Norge, med den amerikanske designingenjören Jonathan Carr och den japanska mästerhantverkaren Yoshinori Mishima som tillverkar pickuperna och övervakar produktionen. Alla produkter tillverkas i Japan med mikroskopisk exakthet på detaljer under direkt övervakning av dessa tre. LYRA-produkter kännetecknas av avancerad designteknik allierad med japanskt hantverk och byggkvalitet. Alla våra produkter är utvecklade och tillverkade för att vara bland de allra finaste som finns i deras kategori. ‎ ‎Varje detalj i varje LYRA-produkt är genomtänkt och utförd med extrem försiktighet. LYRA är ett av få ljudföretag med verkligen originell designutvecklingskapacitet. Varje ny produkt är designad från grunden och uppåt och introducerar meningsfulla bransch ledande framsteg.‎