Monitor Audio Radius 390

Beskrivning

Den nya Radius 390 har dubbla sidefire-10″ C-CAM ellement, en aktiv och en passiv, tillsammans med en kraftfull 220W klass D-förstärkare.

The Radius 390 comprises of colour-coded 10″ C-CAM active/ABR drivers, powered by a 200 W Class D amplifier. Enjoy rapid EQ optimisation from Impact, Music and Movie settings, and system automation via the 12 V trigger.

Features:

* 18mm MDF cabinet construction with internal bracing
* Cool-running 220W Class D amplifier with switch mode power supply (SMPSU)
* Twin side-firing 10” C-CAM® drivers – one active and one passive ABR
* Low pass filter switch – for LFE or Stereo input selection
* Power switch with ON – Auto- Off/ trigger settings
* Stereo/ LFE RCA inputs
* 3 x Pre-set EQ settings – Music/Movie/Impact

Specifikation:

* System Format: Active sub-woofer system – Auxiliary (ABR) loading. 18mm MDF cabinet
* Low Frequency Limit: 30Hz (- 6dB)
* Upper Frequency Limit: Variable 40 – 120 Hz @ 24dB/Octave
* Amplifier Power Output: 220 Watts @ 1% THD+N
* Amplifier Classification: Class D amplifier with Switch mode power supply (SMPSU)
* Bass EQ: Switch Music/ Movie/ Impact
* Phase Control: 0 & 180 degrees
* Auto Sensing: Line Level >3.5mV
* Input Level Requirements: Standby after approximately 15 minutes if no signal sensed
* Driver Compliment: 1 x 10” (250mm) C-CAM® long throw driver 1 x 10” (250mm) Auxiliary bass radiator
* Input Impedance: > 20K Ohms
* Mains Input Voltage AC 110 – 120 V ~ 50/60Hz; AC 220 – 240 V ~ 50/60Hz (Factory Region Preset)
* Dimensions including amp & feet: (H x W x D) 348 x 330 x 345mm
* Connections: Stereo RCA in, LFE in, 12v Trigger in (3.5mm mono mini-jack)
* 12v Trigger Input 5 – 12v via 3.5mm mono mini-jack socket
* Power Consumption 200 Watts / 0.5 Watts in Standby (ErP approved)
* Weight (Unpacked) 13.76Kg

Läs mer på: www.monitoraudio.com