Pro-Ject 6 PerspeX SB DC

Beskrivning

6 Perspex har nu blivit uppdaterad med DC-styrning. DC-styrningen ger klart bättre hastighetsprecision och påminner mycket om den styrteknik som används i Speed Box DS

6 Perspex SB: The ultimate sub-chassis turntable for the 21st century

The transparent acrylic plinth stands on three individually height-adjustable TPE-damped aluminium cones and carries the motor and the sub-chassis. The sub-chassis, made of Corian, rests on three magnetic fields. A magnetic subchassis suspension system avoids parasitic noise normally caused by con-ventional spring mechanism. A supplied spirit level allows easy adjustment of the sub-chassis. A quiet running AC motor unit drives the platter’s outside edge via a belt. It does incorporate an advanced DC-driven motor control, that ensures perfect speed stability and electronic speed change.

The resonance-optimised platter is a sandwich construction utilising a fine-balanced medium density fibre platter and a 4mm thick flat-ground layer of vinyl and a screw-down metal record clamp. It runs on an inverted bearing with stainless-steel axle carrying a ceramic ball/plate bearing. The headshell and armtube of high-end tonearm 9cc Evolution are fashioned from a single piece of carbon-fibre. A conical armtube avoids standing wave reflections. Inverted tonearm bearing comprises four hardened stainless tips in ABEC 7 spec ballraces. Supplied counterweights are suitable for cartridges weighing between 5 – 7,5g / 7 – 10g / 9 – 11g or 10 – 14g.

A top-grade connection cable `Pro-Ject Connect it E´ iwith RCA connectors is supplied (123cm). A dust cover is included.

* Acrylic Plinth
* Sub-chassis made from Corian with magnetic suspension
* Acoustically inert sandwich construction of platter with combination of MDF and vinyl layer as mat
* Inverted main bearing with ceramic ball/plate
* Belt drive with AC motor with DC driven AC generator
* Electronic speed control with 33/45 rpm switching
* Pre-mounted 9″ tonearm 9 cc Evolution
* Tonearm bearings with ABEC 7 ballraces
* 5P Connect it Phono CC cable with RCA plugs

Specifikation

* Speed: 33, 45 (electronic speed change)
* Drive: principle belt drive
* Platter: MDF/vinyl Sandwich (300mm diameter)
* Mains bearing: inverted stainless steel with ceramic ball/plate
* Wow & flutter: 33: +/- 0,10% 45: +/- 0,10%
* Speed drift: 33: +/- 0,10% 45: +/- 0,06%
* Signal to noise: – 73dB
* Tonearm: 9” cc EVO (Carbon)
* Effective arm length: 230 mm
* Effective arm mass: 8,0 g
* Overhang: 18mm
* Tracking force: 10 – 35mN
* Supplied counterweights: 5 – 7,5gr / 7 – 10gr / 9 – 11gr / 10 – 14gr
* External power supply: 15 volts DC / 800mA
* Power connection: 110/120 or 230/240 Volt – 50 or 60 Hz
* Power consumption: 6 watts max / < 0,3 watts standby
* Dimensions (WxHxD): 460 x 183 x 365mm
* Weight: 11,0 kg net

Läs mer på: www.project-audio.com