Alpine S2-A120M

Beskrivning

The next generation of Alpine S-Series amplifiers are designed to take your car audio experience to the next level without breaking the bank. With a sleek new redesign and upgraded features from their predecessors, these amplifiers offer exceptional performance and power on an affordable budget.

The next generation S-Series S2-A120M mono subwoofer amplifier makes it a lot easier to get great bass in your vehicle, delivering up to 1200 Watts RMS power @ 2 Ohms. This massive power output allows to even run multiple subs from a single amplifier. A variable bass boost allows you to dial in some extra punch and impact for more low-frequency enjoyment. You can even add an optional wired remote to control the level of bass from your front seat.

A built-in low-pass filter puts you in command of the frequency spectrum that reaches your sub. The amp includes pre-amp- and speaker-level inputs, so you can install it in almost any vehicle, even one with a factory radio. When using the speaker-level inputs, the amp can sense the incoming signal and turn itself on, eliminating the need to run a separate turn-on wire to the receiver or fuse box.

S-Series amplifiers are available in two mono, a 4-channel and a 5-channel configuration.

FEATURES

Install
* Terminal Layout: Two-sided
* Included terminal covers
* Screw terminals (for speaker and power cables)

General
* Class-D Amplification (Digital)
* Channel Design: Mono Channel
* Side panel controls
* Thermal Management Control
* Top Mounted LED Power/Status Indicator
* Speaker Level Input
* 3 turn-on modes (DC HI, Remote HI, Remote LO)
* Input Channel Selector Switch for Subwoofer
* Crossover: Variable Low-pass Filter (LPF)
* Adjustable Gain Control
* Bass EQ
* Remote Bass Control (RUX-KNOB2) Ready

Specifications:

RMS Power Ratings
* Per Channel into 1 Ohms, 14.4V (≤1%THD+N): 1 x 1200W
* Per Channel into 2 Ohms, 14.4V (≤1%THD+N): 1 x 1200W
* Per Channel into 4 Ohms, 14.4V (≤1%THD+N): 1 x 600W

Sound Tuning
* Crossover: Variable LPF: 50-400Hz (-24dB/oct)
* Bass EQ (+12dB)

General
* Power Requirements: 14.4 V.DC (9 – 16 V allowable)
* Input Sensitivity (RCA Input): Hi: 0.5V – 10V / Low: 0.2V – 4.0V
* High Level Input with automatic power on
* Frequency Response (+0, -3dB: 1W into 4 ohms): 10Hz – 400Hz
* THD+N (@ 10W into 4 Ohms): <0.03%
* Damping Factor: >750
* Weight: 4.0kg

Dimensions
* Heat Sink (WxHxD) mm: 352 x 57 x 210

Läs mer på: www.alpine-electronics.se