Beskrivning
The next generation of Alpine S-Series amplifiers are designed to take your car audio experience to the next level without breaking the bank. With a sleek new redesign and upgraded features from their predecessors, these amplifiers offer exceptional performance and power on an affordable budget.
The S-Series S2-A36F 4-channel amplifier delivers 60 Watts RMS @4 Ohms or 90 Watts RMS @2 Ohms of pristine high-fidelity signal to each of your car’s front and rear speakers, adding sweet, clear sound to your vehicle.
The amp brings your music to life being Hi-Res Audio certified, with its precise details and emotional power clearly revealed with a frequency response up to 40kHz. For a 3-channel 2-way system, you could also use the amp to drive a pair of front speakers with 60 Watts RMS each, while powering a subwoofer with 180 Watts RMS from the bridged rear channels. A variable mid-bass boost on those rear channels allows you to dial in some extra kick and impact to your system’s low-frequency sound. You can even add the optional wired remote RUX-KNOB2 to control the level of the rear channels from your front seat.
High- and low-pass filters put you in command of the frequency spectrum that reaches your speakers and subs. The amp includes preamp- and speaker-level inputs, so you can install it in almost any vehicle, even one with a factory radio. When using the speaker-level inputs, the amp can sense the incoming signal and turn itself on, eliminating the need to run a separate turn-on wire to the receiver or fuse box.
S-Series amplifiers are available in two mono, a 4-channel and a 5-channel configuration.
FEATURES
Install
* Terminal Layout: Two-sided
* Included terminal covers
* Screw terminals (for speaker and power cables)
General
* Class-D Amplification (Digital)
* Hi-Res Audio Certified
* Channel Design: 4/3/2 Channel
* Side panel controls
* Thermal Management Control
* Top Mounted LED Power/Status Indicator
* Speaker Level Input
* 3 turn-on modes (DC HI, Remote HI, Remote LO)
* Crossover: Variable Low-pass Filter (LPF) and High-Pass Filter (HPF),
* Adjustable Gain Control
* Mid-Bass EQ
* Remote Bass Control (RUX-KNOB2) Ready (for channel 3+4 in bridged mode only)
Specifications:
RMS Power Ratings
* Per Channel into 2 Ohms, 14.4V (≤1%THD+N): 4 x 90W
* Per Channel into 4 Ohms, 14.4V (≤1%THD+N): 4 x 60W
* Bridged, 4 Ohms, 14.4V: 2 x 180W
Sound Tuning
* Crossover: Variable LPF: 50-400Hz (-24dB/oct)
* Bass EQ (+12dB)
General
* Power Requirements: 14.4 V.DC (9 – 16 V allowable)
* Input Sensitivity (RCA Input): Hi: 0.5V – 10V / Low: 0.2V – 4.0V
* High Level Input with automatic power on
* Cable size: Power Cable AWG 4, SPK Cable AWG 8
* Frequency Response: 10Hz – 40kHz
* THD+N (@ 10W into 4 Ohms): <0.03%
* Damping Factor: >100
* Weight: 2.2kg
Dimensions
* Heat Sink (WxHxD) mm: 220 x 57 x 210
Läs mer på: www.alpine-electronics.se
Varumärke
Alpine

