Alpine Status HDA-V90

Beskrivning

Superior Sound Performance
Alpine Introduces the all-new Alpine Status sound system: using the same engineering and design concepts drawn from the third generation, Ultra High-Resolution AlpineF#1Status system, Alpine created “Alpine Status” to achieve High-Resolution Sound at a more approachable and accessible price point. The Alpine Status system is also extreme flexible: all components can be purchased and used in “stand-alone” configuration.

If you want to build a full Alpine Status sound system with external amplifiers, we recommend the Alpine Status Class-D amplifiers. These amps are developed to perfectly match the Alpine Status speakers and subwoofer for best sound quality. There is a Mono power amplifier (HDA-M80), a 4-channel amplifier (HDA-F60) and a 5-channel amplifier (HDA-V90) with a dedicated high-power subwoofer channel.

All controls are conveniently located on the top side of the amplifiers, protected by a cover plate. This gives you easy access to HP / LP filters and frequency adjustments, gain controls and input channel selectors (different for each amplifier model).

General

* Channel Design: 5/4/3 Channel
* Class-D amplification circuit
* Power supply and speaker channel connectors
* Copper-plated chassis
* Top control panel (below top cover)
* Black circuit board
* Non-Shutdown design
* Thermal Protection
* One-sided terminal
* Blue power LED
* Compatible with RUX-KNOB2 bass controller (for subwoofer channel)

Specifications:

RMS Power Ratings:
* Per Channel into 2 Ohms, 14.4V: 4 x 100W + 1 x 500W
* Per Channel into 4 Ohms, 14.4V: 4 x 75W + 1 x 300W
* Bridged into 4 Ohms, 14.4V: 2 x 200W

Sound Tuning:
* Crossover: Variable HPF, 50-400Hz (-12dB/oct )
* Crossover: Variable LPF: 50-400Hz (-24dB/oct )
* Subsonic Filter (Subwoofer): 8-40 Hz (-24dB/oct)

General:
* Input Sensitivity (RCA Input): Hi: 0.5V – 10V / Low: 0.4V – 10V
* Frequency Response (+0, -3dB: 1W into 4 ohms) for CH-1/2/3/4: 10Hz – 30kHz
* Frequency Response (+0, -3dB: 1W into 4 ohms) for CH-5: 8Hz – 300Hz
* THD+N (@ 10W into 4 Ohms): ≤0.02%
* Damping Factor: Channel 1/2/3/4: >500, Channel 5: >1000
* Weight: 3.9kg

Dimensions:
* Width 291 mm
* Height 53.5 mm
* Depth 189.5 mm

Läs mer på: www.alpine-electronics.se