11,990kr – 29,999kr
Dynaudio Sub RCC
VägghögtalareSubwoofersSubwoofer för installation. Går att installera i vägg/tak eller på väggen. Köp till DSP-styrda slutsteget RS 500 från AudioControl. Slutsteget kan driva upp till 2st Sub RCC.
Beskrivning
Sub RCC
Engineered to entertain
A new foundation for custom audio: clear, deep, undistorted bass that dives all the way down to 16Hz
A new foundation for custom audio: clear, deep, undistorted bass that dives all the way down to 16Hz
High-quality low-frequency delivery for the most demanding installation projects. Sub RCC installs in walls and ceilings, either into standard 2×4 stud-bays before construction or on the surface afterwards using the supplied adapter kit.
We can hear the question already: “Subwoofers and drywall? But…”.
Don’t worry. With Sub RCC you don’t need to be concerned about rattles. It uses Reactance Cancelling Configuration (RCC) technology derived from Dynaudio’s pro studio subwoofers: two drivers work in opposition to each other to eliminate vibration in the speaker and the wall or ceiling.
The whole assembly is housed in a special aluminium enclosure that has a trick up its sleeve: to keep things simple when it comes to specifying the right sub for the job (surface-mount or between studs), we’ve included brackets for both situations in the box. No more having to second-guess if the project scope might change.
Two magnetic grilles are also supplied for different installations (retro-fit and pre-fit) – and they can be painted too, for a seamless finish.
For amplification, we’ve teamed up with the experts at AudioControl in the US. The resulting RS 500 DSP-controlled unit is precisely matched and tuned out of the box for the Sub RCC with Dynaudio EQs and limiters. Installers can also tweak the unit’s graphic EQ if needed. And don’t worry if you’re working with more than one sub: each amp can power two Sub RCC units for even more flexibility.
Specifikation:
* Type: In-wall subwoofer
* Drivers: 4 x 3×6 inch long-throw
* Frequency response (+/- 3 dB): 20hz to 145hz
* Impedance (nominal/minimum): 8Ω / 5Ω
* Sensitivity (dB SPL [2.83 V/1 m]): 92 dB
* Continuous power: 160 W
* Long term power: 400 W
* Dimensions pre-fit (W x H x D): 355 x 354 x 101 mm
* Dimensions retro-fit (W x H x D): 400 x 400 x 101 mm
* Cut-out dimensions retro-fit: 366 x 366 mm
Features: AudioControl RS 500 Slutsteg
* 500 Watts at 8/4/2 Ohms
* Digital Signal Processing (DSP) Performance
* Six-band Graphic EQ
* Eight-band Parametric EQ
* Crossover with Subsonic Filter
* Built-In Speaker Optimization Profiles
* Ethernet Port for Status Monitoring, Source Switching and 12 Volt Trigger Control
* Network Programmable Graphic & Parametric Equalization with User Memories
* Digital Signal Sense
* AudioControl LightDrive Anti-Clipping Speaker Protection
* Balanced Inputs/Thru
* Unbalanced Input/Thru
* LFE Input/Thru
* Speaker Level Inputs
* Home and Commercial Installations
Läs mer på: www.dynaudio.com
Övrig information
Paket Färger mm | Med Slutsteg, Utan slutsteg |
---|